Get all the features and benefits of the performance-proved Rex Batch 150 series batch plants, with the added convenience of wet/dry operation
Specifications
- Three or four compartment aggregate bin. Each can be split in half -- end compartment into thirds.
- Motorized turn spout and chute assembly with 1/2 HP electric drive
- Choice of 2,3,4 or 5 compartment bin
- Cement and aggregate batchers in 10 or 12 cu. yd. capacity with load cells
- Tilt Mixer -- twin electric motor driven at 10.5 RPM, with 30" discharge opening
- Choice of 36" or 48" batching belt conveyor
- Air System -- choice of 10 or 15 HP Compressor
- 3" Badger turbo-type water meter for water temp to 190 degrees F
- Power Panel is NEMA 12 rated with motor starters, overload relays and automatic resets, wired for customer provided 460 volt, 3 phase, 60 Hz, and 115 volt, single phase 60 Hz power and locally provided disconnects and safety devices.
- Available with RC3
- Flopgate assembly with collecting hopper or holding hopper
View Larger Image
| Yards* |
Tons* |
"A" |
"H"** |
| All Batcher Sizes |
| 160 |
240 |
6' 0" |
64' 3" |
| 185 |
280 |
8' 0" |
66' 3" |
| 210 |
315 |
10' 0" |
68' 3" |
| 230 |
350 |
12' 0" |
70' 3" |
| 260 |
390 |
14' 0" |
72' 3" |
| 280 |
425 |
16' 0" |
74' 3" |
C.P.M.B Rating Method
* Includes Capacity of Basic Bin Bottom |
**Note:
The following are included in the "H" dimension:
1' 6" for Telescopic Boot
1' 6" for Loading Ramp
12' 6" for Rubber Clearance with Boot-Up
Conveyor Reference Grade is the Same as Plant Grade
If any of the above assumptions do not apply, the "H" dimension may be modified accordingly. |
|
| "E" & "F" |
| Total Cement Capacity |
| Cubic Feet |
Barrels |
"E" |
"F" |
| Min. - Max. |
| 4000 |
835 - 1000 |
0' 0" |
5' 4 1/4" |
| 6040 |
1260 - 1510 |
0' 0" |
11' 4 1/2" |
| 8160 |
1700 - 2040 |
11' 4 1/2" |
6' 0" |
| 9900 |
2060 - 2475 |
12' 0" |
11' 4 1/2" |
| C.P.M.B. Rating Method |
|
Note: Specifications and dimensions are provided for reference only -- we reserve the right to change them without notice. Please contact us for current product and warranty information.
|
